Internal Cable Routing

I wanted the cabling to be routed internally to make the frame look its best. Because of the frame design I realised how difficult it would be to have only the cable inner running through the frame. If I ever had to replace it, then running a new inner woudl be very difficult. I decided, therefore to run a section of outer cable through the frame that would be terminated in a section of brass tube within the frame. I drilled through the 'bulkheads' where necessary. I ran internal routing for front and rear derailleur and the rear brake.

 

internal cable routing bike

cable routed internally bicycle

 

 

 

 

 

 

 

 

© Christopher Thompson